Typhoon HIL Blog


HIL Tested Case Study: Induction Motor Drive for Mining Automation with Indrivetec AG

Posted by Debora Santo and Sergio Costa on Jun 24, 2020 3:25:24 PM

Hero Fig 1 - DFIM Motor Drive for Mining SAG Mill

 

The case study featured here is a 3 MW doubly fed induction motor (DFIM) drive used for mining applications. The DFIM drive controls were designed, built, and tested by Indrivetec AG, at the request of CSE-Uniserve. Indrivetec AG is a Zurich-based power electronics, drives, and energy storage company and is an early adopter of Hardware-in-the-Loop (HIL) technology with a research lab primarily based on HIL for control design and testing.

The stator of this motor is connected to the medium voltage grid, and the rotor is connected to a liquid resistor of the system integrator CSE-Uniserve and an Indrivetec Insulated-gate bipolar transistor (IGBT) converter. Here, the resistor is used for starting and running at a constant speed, while the converter is used for variable speed operation.

 

Read More

Topics: C-HIL, HIL, DER, power electronics design, HIL simulation, variable speed drives

A Better Way to Design and Test Software for Electric Vehicle Motor Drives

Posted by Debora Santo and Sergio Costa on Jun 2, 2020 1:11:50 PM

Asset 38@3x-8

 

  • Employ high-fidelity modeling of electronic and EV systems.
  • Safely catch control issues before deployment.
  • Improve project schedule performance and streamline workflow.
  • Fully automate testing.
  • Easily import model parameters.

 

Model-based software development is a widely accepted practice in the automotive industry, motivated by the software's safety critical nature and the need for the development and testing process to comply with the ISO 26262 standard. With the availability of accurate physical plant models (e.g. motor drive), software testing can start early in the development process, allowing you to discover and fix problems as soon as they arise.

Read More

6 Reasons for Rapid Adoption of HIL Testing for Variable Frequency Drives

Posted by Ivan Celanovic on May 14, 2020 11:39:22 AM

Asset 35@3x


  • Software is becoming a key value generator for Variable Frequency Drives
  • New control algorithm development is driven by new motor designs, new semiconductor switches, and more powerful processors
  • System level interoperability requirements are constantly expanding
  • Modular power converter design has become a standard
  • Grid code compliance is becoming a requirement
  • Software lifecycle maintenance complexity is exploding
Read More

Topics: C-HIL, controller hardware in the loop, hardware in the loop, HIL, Energy, smart grid converters, HIL simulation, motor drives, variable speed drives

4th Generation HIL: Built for the most advanced motor drive applications

Posted by Dusan Majstorovic on Apr 2, 2020 2:45:00 AM
  • Ultra-high fidelity redefined.
  • 200ns simulation time step.
  • 3.5 ns digital input sampling.
  • The most accurate 100kHz Dual-active bridge (DAB) model.
  • JMAG-RT FEM machine model import.
  • HIL connectivity exploded: USB3.0, Ethernet, GB/s serial link, JTAG, General Purpose IO (GPIO)

While automotive and aerospace industries have already adopted model based HIL testing, power electronics industry is only playing a catch up. The good news is that the 4th generation HIL is delivering the unprecedented model fidelity needed for the most advanced motor drives and automotive power electronics applications.

Read More

Topics: C-HIL, controller hardware in the loop, HIL, smart grid converters, power electronics design, controller design, HIL simulation, motor drives

Building A Better Microgrid - Schneider Electric Microgrids

Posted by Samantha Bruce and Doroteja Balaban on Oct 21, 2019 10:55:25 AM

LinkedIN Posts-01

 

This article is the third in a series from the Microgrid Conference Panel 2019 – Making Sure Your Microgrid Will Work: Risk Reduction with Controller Hardware In the Loop (C-HIL) and Model-based Engineering

Andy Haun, CTO of Schneider Electric’s microgrid business, was one of the panelists at the Microgrid Conference 2019. He has led many key product development and technical innovations at Schneider Electric to simplify and enable effective grid-edge solutions including battery-based energy storage with highly-efficient inverters for distributed energy resources.

Andy talked about how Schneider Electric used model-based system engineering and microgrid Hardware-in-the-Loop testing for designing and testing power systems controls.

 

Read More

Topics: Smart Inverters, C-HIL, controller hardware in the loop, hardware in the loop, Digital Twin, smart grid converters, grid code compliance, low voltage ride through, advanced smart grid converters, advanced grid support functions, model microgrids, microgrid hardware in the loop, microgrid testbed, power systems, mbse

Building A Better Microgrid - Eaton Microgrids

Posted by Samantha Bruce and Doroteja Balaban on Sep 16, 2019 3:00:00 AM

LinkedIN Profile

 

This article is the second in a series from the Microgrid Conference Panel 2019 – Making Sure Your Microgrid Will Work: Risk Reduction with Controller Hardware In the Loop (C-HIL) and Model-based Engineering

Qiang Fu, Regional Technology Manager at Eaton, was one of the panelists at the special session. He leads a research team to identify, develop, and validate technologies including microgrids, renewable energy, and power conversion.

He talked about the key challenges model-based system engineering and controller Hardware-in-the-Loop solves for microgrid development.

 

Read More

Topics: Smart Inverters, C-HIL, controller hardware in the loop, hardware in the loop, Digital Twin, smart grid converters, grid code compliance, low voltage ride through, advanced smart grid converters, advanced grid support functions, model microgrids, microgrid hardware in the loop, microgrid testbed, power systems, mbse

Building A Better Microgrid - Risk Reduction with C-HIL and Model-based Engineering

Posted by Samantha Bruce and Doroteja Balaban on Jul 29, 2019 4:36:28 PM

Paul Roege_VP_TyphoonHIL-01

 

This article is the first in a series from the Microgrid Conference Panel 2019 – Making Sure Your Microgrid Will Work: Risk Reduction with Controller Hardware In the Loop (C-HIL) and Model-based Engineering.

Paul Roege, Vice President for Strategic Initiatives at Typhoon HIL, introduced panelists from Schneider Electric, Schweitzer Engineering Laboratories, Eaton, Raytheon and EPC Power. He adeptly described major problems with the current approach to microgrid development.

And how C-HIL and model-based engineering allows for a more integrated approach to microgrid design and testing throughout the entire project lifecycle.

Read More

Topics: Smart Inverters, C-HIL, controller hardware in the loop, hardware in the loop, smart grid converters, grid code compliance, low voltage ride through, advanced smart grid converters, power electronics design, advanced grid support functions, model microgrids

Industry Spotlight Q&A: Powerstar Energy Management System

Posted by Samantha Bruce on Jul 22, 2019 1:04:01 PM

 

 

If we didn't have this, we'd be stuck using a platform that we couldn't change and therefore optimize. It really helps with confidence.

                                                                    -Solon Mardapittas, CTO of Powerstar

 

For this next spotlight, we got a chance to speak with Powerstar’s CTO, Solon Mardapittas, on developing Powerstar’s intelligent energy management system (EMS) with real-time Hardware-in-the-Loop (HIL) technology. 

Based in the UK, Powerstar’s integrated energy system combines its voltage optimization technology with energy storage solution. This not only secures power but lowers energy costs and provides demand side response services to the grid.

Here is the insightful interview with Solon Mardapittas on Powerstar’s rigorous quality assurance process for its leading-edge technology:

Read More

Topics: Smart Inverters, C-HIL, controller hardware in the loop, hardware in the loop, smart grid converters, grid code compliance, low voltage ride through, advanced smart grid converters, power electronics design, advanced grid support functions, model microgrids

The Ship is a Microgrid (Part II) - Why is this so hard to design and build?

Posted by Matt Baker on Jun 24, 2019 9:30:00 AM

00 Top

 

This is an extension of my previous blog relating a ship's power system to a microgrid - interconnected loads (propulsion, C4ISR, propulsion and auxiliary) and distributed energy resources (power generation, distribution and energy storage) acting as a controllable entity. I will be describing a layman’s perspective on digital engineering as it applies microgrid design, building, commissioning, operation and maintenance or lifecycle of a ship. 

Read More

Topics: Microgrids, C-HIL, controller hardware in the loop, hardware in the loop, HIL, Shipboard Power Systems, Naval Microgrid, Miltary, Navy, Digital Twin

4 ways Controller Hardware in the Loop and Model-Based Engineering are Reducing Risk

Posted by Ivan Celanovic on May 21, 2019 3:48:37 PM

 

Reduce Risk

 

 

 

 

 

Industry 4.0 is dawning, and digitalization, decarbonization, and decentralization (aka D3) are fueling the electric grid (r)evolution. D3, in turn, creates opportunities for immense value creation, but invokes new technologies and design concepts, and change brings risk.

Read More

Topics: Microgrids, inverter controller, controller hardware in the loop, HIL, Resilience, Energy

Recent Posts

Subscribe to Blog Updates

Subscribe to our channel

Share this page