Modbus Tutorial Series - 3 Tutorials with 1 Click

These step by step tutorials will show you how to configure your HIL device to communicate with Modbus as well as Modbus/SunSpec Protocol and will demonstrate how to use the protocol in a battery storage application.

Why Modbus? Modbus is an open, easy to use and implement protocol. Thanks to its simplicity, the Modbus protocol has become a standard communications protocol in industry, and is now the most commonly available means of connecting industrial electronic devices. It is used widely by many manufacturers throughout many industries.

Agendas:

Part 1:

• Introduction
• Step 1 – Create new model.
• Step 2 – Drag and drop the Modbus component.
• Step 3 – Configure the server.
• Step 4 – Connect the signals.
• Step 5 – Compile the model.
• Step 6 – Read the simulation values using external application.
  

Part 2:

• Step 1: Load Example Model
• Step 2: Configure Modbus Server and Connect Signals
• Step 3: Compile and Load the Model
• Step 4: Load SCADA panel and Run the Simulation
• Step 5: Read Simulation Values using External Application
• Step 6: Configure SunSpec Modbus Server and Connect Signals
• Step 7: Compile and Run the Simulation
• Step 8: Read Simulation Values using SunSpec Dashboard

Part 3: 

• Step 1: Load example models,
• Step 2: Configure the Modbus server and connecting the signals,
• Step 3: Compile and load the model,
• Step 4: Load the SCADA panel and running the simulation,
• Step 5: Read the simulation values using external application,
• Step 6: Configure the SunSpec Modbus server and connecting the signals,
• Step 7: Compile and run the simulation
• Step 8: Read the simulation values using external application